Whenever one considers storage options for their warehouse, it is very common to gravitate to merely looking at what options yield the most pallet positions.  Density, after all, is the goal.  Stick as much product as possible into a given space.

One common mistake that is made is to let density drive your design process.  Density is the ultimate goal, but focusing on operational efficiency is more critical.  Putting a system in that does match your operation may yield more pallet positions on paper, but in reality, can actually produce significantly less than anticipated.

“Pigeon Holing” as it is called can occur when the design does not match the operation.  This is where product cannot be stored in the manner in which it was designed.  This creates holes in the storage density and does not allow you to take advantage of all the positions you have created.

A common comparison is one that centers around two high density approaches, Pushback rack and Drive-In rack.

Pushback rack is where each pallet resides on a series of trays within each pallet location.  Every subsequent pallet that is placed in a particular location has the ability to “push” the previous pallet back one location.  This allows multiple pallets of the same SKU to be housed in a very dense fashion.  Pushback is an ideal LIFO (Last In First Out) storage layout.  It also allows for more pick facings giving you the ability to store a larger number of SKU’s in a given aisle.  The ideal application is one where you have multiple pallets of the same SKU that need to be stored and retrieved in a medium paced operation that does not require a FIFO (First In First Out) methodology, e.g. non-perishable items that do not have a short life-span.

Comparatively, Drive-In rack creates lanes down an aisle that allow a lift truck to travel into the lane to store product.  This is the densest storage media available.  However it has its limitations.  Only one SKU can be placed in a lane.  Once the lane is loaded, pallets must be pulled from the front backwards.  Once a pallet is removed, deeper pallet will not be available if you load the empty position back up.  So, to gain access to the back pallets, you have to leave the front positions open.  This reduces your ability to take advantage of the density you have created.  The ideal application for Drive-In rack is where you load a lane and flush that lane in its entirety.  Fast moving operations can benefit from this design.

The bottom line is: Don’t be driven by maximizing pallet positions at the cost of the efficiency of your operation.

Without argument, if you have a facility that is currently using Metal Halide, Mercury Vapor or High Pressure Sodium, you need new lighting.  The great thing about it is that very often, these are self funding projects.  Yes, you heard me correctly.  You can put new lighting in at no cost to your company. 

Each month you get a bill from your energy company.  You have to pay this bill otherwise your power will be cut off.  Using new lighting technology will lower your lighting costs up to 75% under the right circumstances.  If you pay $10,000 a month in lighting costs and that is cut in half, the $5,000 savings will pay the lease payment.  There is no impact to your cash flow.  Once you pay off the lights, you’ll be putting that $5,000 right to the bottom line.  That is essentially increasing your net revenue by $60,000 a year.  In this economy, more revenue certainly isn’t a bad thing.

There’s more.  The federal tax credit has been extended.  That means that you can take up to $.60/sq. ft. up to the cost of the project as a credit to your taxes.  This can mean big money, lower the cost of the project and improve the payback period.

It just doesn’t make sense not to change your lighting.  Period.

To be honest, I can’t stand salespeople.  They drive me nuts.  I know what I want, I don’t need their help and I do not want someone forcing a product on me that may or may not be the best suited for my needs.  This sentiment doesn’t surprise me, our culture and experiences have trained us to be weary of salespeople.  They bother you by mail, on the phone and when you walk into a store.  Frankly, it is just plain annoying.   However, salespeople can be more than just annoying, they can be unethical.  Many of us have been burned by an unethical sales approach.  We have bought into a ‘pitch’ only to find out that we had been taken advantage of or that we bought something that really doesn’t do what it is supposed to do.  It is unfortunate, but there are a lot of very able salespeople that make this approach a common practice and apply their skills in an inappropriate manner.  This is why I don’t blame the client.  They have been given every reason not to trust salespeople.

The real irony of this article is that ‘technically’ I am a salesperson. 

 However, the real shame is that not all salespeople are what they are perceived to be.  There are a lot of us out there that always have the client’s best interest at heart.  No matter what the client’s issue is, it’s more about solving it, than trying to make a product fit a solution it is not best suited for.

One advantage that I have is that by being a material handling systems integrator, I am not a distributor of one particular brand of product.  My company has established relationships with multiple manufacturers.  This allows us to select the most appropriate mix of products to create the best solution to a client’s issue.  We don’t have to explain why our brand is better than ‘their’ brand.  We can explain how, through analysis and industry expertise, we recommend a particular solution.  We analyze the strength’s of the manufacturer’s product against the needs of the client.  I love this approach.  It is more consultative approach then a sales approach and I can add value to the customer’s operation.

So what’s my problem?

I have to fight even harder to overcome the initial wall that is built in front of me that protects the customer from the dreaded ‘salesperson’.  It is amazing the level of distrust a customer can have during the initial stages of your relationship.  They shake with their right hand and have their left on their wallet.

Do we make money?  Sure we do, every company needs to make money to pay employees and keep the lights on.  However, just because someone is making money on a transaction doesn’t mean you aren’t getting value from it as well.  Not only is there a lot of time in the proposal phase just to be awarded the project, but the company has to successfully execute in order to re-coop the costs of the time, risk and intellectual property offered during the pre-sale process.  Many salespeople looking to ‘close the deal’ may compromise their company’s ability to successfully execute the project by slashing budgets to be the low cost provider.  True value on a project is only recognized after a project is commissioned.  At that point it becomes clear whether the promises or claims made during the sales process were merely a ‘pitch’ or an actual reflection of a company’s ability and strengths.    

What’s the bottom line?

Not all salespeople are ‘out to get you.’  Judge the individual, not the title. Let someone help.  You might be surprised at the benefit you receive.

Going green is the new hot button in just about every industry.  From clothes to cars, going green is the ‘in thing’.  The Material Handling industry is no different.  Many of our industry’s publications highlight the green initiatives underway with today’s companies.  Yet, even with all the buzz about green, the one consistent argument that arises is the cost. There is no question that green products can cost a premium over their standard counterparts, but as technology advances, so does the opportunity to justify that premium. 

Green lighting is one of the simplest ways to make your operation greener.  Not only does green lighting produce better quality light, you’ll be surprised to know that it IS cost effective and can have a tremendously short payback period.  Historically, facilities are outfitted with Metal Halide or Sodium bulbs.  Represented by obnoxious and large fixtures, these bulbs take up to 10 minutes to warm up and produce a terrible, yellow light. 

In comes the green revolution.  High output lighting, commonly referred to as T5, T8 or T12 lighting is providing companies with an alternative that has immediate impact to the bottom line.  They have so many advantages it’s hard for companies to find excuses NOT to justify them.

Comparison

Data Source: Westinghouse Lighting Solutions

BEWARE!!  Not all High Output systems are the same.  There is more to the science of lighting than the just the bulb.  Reflectors play as large a role as the bulb, directing the light in the right area maximizing every lumen you are producing. 

The approach of a quality lighting provider will be to match the right light to your application and facility layout.  Matching the right bulb and the right reflector will maximize your efficiency and increase your savings. 

**Keep in mind that many states are also offering tax savings for converting your current lighting to high efficiency lighting.  Check your state laws to see if your business qualifies.

Let South Atlantic Systems Group be your partner and show you how Going Green can save you money.